Drylok Water-Based Concrete Floor Paints

DRYLOK Latex Concrete Floor Paint is a high-performance, all-in-one paint and primer solution formulated to upgrade and safeguard your concrete surfaces. Whether you're working on a garage floor, basement, patio, or walkway, this latex-based formula offers excellent adhesion, durability, and a non-slip, flat finish that resists glare. The advanced ceramic-fortified X-linking technology ensures long-lasting protection while enhancing the look of new or previously painted surfaces. It's easy to apply by brush or roller and dries to the touch in just 2 hours, with a recoat window of only 4 hours—so you can finish your project quickly. Ideal for both interior and exterior use, it covers 300 to 400 square feet per gallon and cleans up easily with soap and water. The paint is tintable for custom color matching and does not require a separate primer if applied to properly prepared surfaces. Before application, be sure to clean thoroughly, remove efflorescence, and etch smooth concrete to ensure proper adhesion. A simple moisture test can help you determine readiness, and if needed, DRYLOK Wet Wall Bonding Primer is available for difficult surfaces. For best results, apply in temperatures above 50°F and wait 5 days before subjecting surfaces to vehicle traffic. With DRYLOK, you get a tough, attractive finish and peace of mind that your concrete is protected against wear, weather, and daily use.

• All-in-one latex paint and primer for interior and exterior concrete surfaces
• Ceramic-fortified X-linking formula offers enhanced durability and adhesion
• Non-slip, flat finish ideal for garages, basements, patios, and walkways
• Dries in 2 hours to touch and is ready to recoat in 4 hours
• Covers 300 to 400 square feet per gallon
• Cleans up easily with soap and water
• Tintable and suitable for both new and previously painted surfaces
• No separate primer needed if surface is properly prepared
• Surface must be cleaned, etched, and free of moisture for best results
• Use DRYLOK Wet Wall Bonding Primer on damp or non-porous concrete
• Apply with brush or roller in temperatures above 50°F
• Allow 5 days before vehicle traffic and 24 hours for heavy foot traffic