SamaN pt Cocoa Seal, Stain, and Polyurethane

SamaN Seal, Stain, and Polyurethane is a versatile, easy-to-use finish designed to enhance and protect indoor wood surfaces in one simple step. This hybrid water-based formula blends a modified alkyd stain with a protective resin, allowing it to seal, stain, and finish bare or pre-finished wood at once. Ideal for projects such as cabinets, moldings, furniture, doors, walls, and decorative woodworks, it brings out the natural beauty of the grain while offering a smooth, low-odor finish. It applies easily without the need for a pre-stain conditioner and dries quickly without raising the wood grain.

Although not intended for large flooring projects, it can be used on stairs and high-traffic areas if followed by at least two coats of a compatible top coat. Thin applications are best to avoid overbuild and ensure a durable cure. Two coats are recommended for optimal satin sheen, with three coats yielding a semi-gloss finish. The product should be stirred thoroughly before use and applied with a natural bristle brush, foam brush, roller, or sprayer. Surfaces must be clean and dry, and sanding between coats is suggested for best results. While the stain dries in 2–4 hours, it fully cures in 21 days. Initial cleaning can begin after 10 days using a neutral pH cleaner. Cleanup is easy with soap and water if done before the stain dries. Whether you’re reviving a vintage piece or completing a brand-new wood project, this all-in-one solution is a time-saving, professional-quality finish anyone can use with confidence.

• Seals, stains, and protects indoor wood surfaces in one step
• Ideal for cabinets, furniture, doors, moldings, and decorative projects
• Suitable for bare or pre-finished wood with excellent adhesion
• Cannot be used on large floor surfaces but fine for stairs with top coat
• Hybrid water-based formula with modified alkyd resin dries fast
• Does not require a pre-stain conditioner and won’t raise wood grain
• Low odor and easy to apply by brush, roller, or sprayer
• Thin layers produce best finish and avoid rubbery texture
• Two coats recommended for satin, three for semi-gloss finish
• Pre-test and stir thoroughly to ensure color accuracy
• Surface must be clean, dry, and sanded before application
• Work in sections to prevent lap marks and uneven color
• Dries in 2 to 4 hours depending on conditions
• Wait 10 days before first cleaning with a neutral pH cleaner
• Fully cures in 21 days for lasting durability
• Clean tools immediately with soap and water or solvents if dried