SamaN pt Sea Salt Penetrating Oil-Based Stain

SamaN Penetrating Oil-Based Stain is a premium wood stain that enhances the natural beauty and depth of interior wood surfaces in a single coat. Ideal for bare wood floors, furniture, cabinets, doors, and more, this oil-based blend of alkyd resin, mineral oils, solvent, and protective wax penetrates deeply to enrich grain contrast and create a warm, rustic look. Its forgiving formula applies smoothly without creating overlapping marks or raising the wood grain, even on large or intricate surfaces. You can leave it as is for a soft matte-to-satin sheen, polish it to a higher gloss, or finish it with a top coat to add durability and customize the level of shine.

The stain is low in VOCs, has minimal odor, and dries within 6 to 8 hours under ideal conditions. Coverage is exceptional—up to 48 square meters per gallon depending on wood texture and porosity. Application is easy using a sponge, brush, or cotton wick, with excess wiped away after 5 to 10 minutes. Stir well before and during use to maintain color consistency. While the built-in wax offers light protection, for added resistance and long-term wear, especially on high-traffic surfaces, a compatible SamaN water-based top coat can be applied after 8 hours. Cleanup is simple with mineral spirits. This stain is perfect for DIYers and professionals looking to bring out the rich, organic character of indoor wood while retaining full control over finish and protection.

• Ideal for indoor bare wood including floors, furniture, cabinets, and more
• Penetrates deeply to enhance natural wood grain and color contrast
• Applies smoothly without lap marks or grain raising
• Low VOC and low odor for a more comfortable application
• Built-in wax offers light protection with a matte to satin finish
• Can be polished or top coated for added durability and sheen
• Only one coat is needed for strong, even color
• Easy to apply using brush, sponge, or cotton wick
• Wipe off excess stain after 5 to 10 minutes
• Dries in 6 to 8 hours under standard conditions
• Wait at least 8 hours before applying a SamaN protective finish
• Covers up to 48 square meters per gallon depending on wood surface
• Shake or stir well before and during application for color consistency
• Can be left as a standalone finish or used under a clear coat
• Clean tools with mineral spirits or paint thinner