Drylok Original Latex Concrete & Masonry Waterproofer
Available Inventory
✓ 16 in stock
Drylok Original Latex Concrete & Masonry Waterproofer - 1 Gallon / Gray is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
We ship via UPS Ground and LTL to the continental USA. LTL shipments will require a scheduled and signed delivery.
Drylok Original Latex Concrete & Masonry Waterproofer - 1 Gallon / Gray is backordered and will ship as soon as it is back in stock.
Description
Description
DRYLOK Original Concrete & Masonry Waterproofer is a proven, latex-based solution designed to stop water seepage through masonry surfaces, both above and below grade. Whether you're protecting new construction or repairing existing leaks, this easy-to-apply product is guaranteed to stop water pressure up to 10 psi and withstands winds up to 98 mph. Its flat white, sandy-textured finish not only provides functional waterproofing but also an attractive, durable look. DRYLOK Original forms a semi-impermeable barrier with less than 1 perm rating, effectively sealing out both moisture and vapor. Ideal for use on masonry walls, brick, cinder blocks, stucco, and poured concrete, it can be applied indoors or outdoors using a brush or roller. Two full coats are required for warranty coverage, with drying times of 1.5 hours to touch and 2–3 hours between coats. Surface prep is essential: remove efflorescence, dust, grease, and old paint, and ensure porous texture for adhesion. Use DRYLOK Fast Plug to patch cracks, and DRYLOK Wet Wall Bonding Primer for surfaces with moisture issues. DRYLOK Original can also be used in concrete fish ponds and non-potable water tanks once fully cured. Tintable and top-coatable after 24 hours, this waterproofer combines dependable performance with long-term peace of mind, backed by a fully transferable 10-year warranty.
-
Stops water pressure up to 10 psi and resists 98 mph winds
-
Suitable for interior, exterior, above or below grade masonry surfaces
-
Latex-based formula with flat white, sandy textured finish
-
Semi-impermeable coating resists water and vapor penetration
-
Requires minimum of 2 coats for full waterproofing warranty
-
Dries in 1.5 hours to touch and 2–3 hours to recoat
-
Can be top coated after 24 hours and is tintable
-
Applied with brush or roller to clean, porous masonry
-
Treat efflorescence and smooth surfaces with etch or bonding primer
-
Patch cracks and joints with DRYLOK Fast Plug
-
Can be used on masonry walls, brick, stucco, and concrete
-
Backed by a fully transferable 10-year warranty






